<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>飞凌嵌入式开发者社区 - S5P4418/S5P6818</title>
    <link>https://bbs.forlinx.com/forum-94-1.html</link>
    <description>Latest 20 threads of S5P4418/S5P6818</description>
    <copyright>Copyright(C) 飞凌嵌入式开发者社区</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Sat, 10 Oct 2026 16:30:35 +0000</lastBuildDate>
    <ttl>30</ttl>
    <image>
      <url>https://bbs.forlinx.com/static/image/common/logo_88_31.gif</url>
      <title>飞凌嵌入式开发者社区</title>
      <link>https://bbs.forlinx.com/</link>
    </image>
    <item>
      <title>4418核心板出现网络初始化失败</title>
      <link>https://bbs.forlinx.com/thread-97260-1-1.html</link>
      <description><![CDATA[你好，我这边遇到通过reboot重启，无法加载网卡的现象。
出现这种问题通常都是telnet后台之后，通过reboot重启会出现，断电重启目前没发现这种现象，而且这种现象一般是连续多次reboot才会出现。
请问这是什么问题，或者导致这种现象的原因有哪些？



启动过程打印信息 ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>MatthewZhai</author>
      <pubDate>Mon, 13 May 2024 10:53:10 +0000</pubDate>
    </item>
    <item>
      <title>6818如何使用硬件解码MJPEG图像</title>
      <link>https://bbs.forlinx.com/thread-95587-1-1.html</link>
      <description><![CDATA[如题，linux应用程序如何使用硬件解码MJPEG图像]]></description>
      <category>S5P4418/S5P6818</category>
      <author>17861101529</author>
      <pubDate>Fri, 29 Mar 2024 12:25:40 +0000</pubDate>
    </item>
    <item>
      <title>OK6818_USB连接PC_再给开发板上电_系统无法启动</title>
      <link>https://bbs.forlinx.com/thread-94311-1-1.html</link>
      <description><![CDATA[如题：我们购买了OK_XX18_C_V1.2开发板， 测试过程中发现， 只要先连接PC和开发板的USB再上电， 开发板就无法启动如果先给开发板上电，进到Android 桌面后， 再连接开发板和PC之间的USB线， 则系统能正常启动， adb/mtp功能正常
另外， 这个问题只有搭配比较新的电脑才 ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>dallas_luka</author>
      <pubDate>Sun, 04 Jun 2023 02:56:06 +0000</pubDate>
    </item>
    <item>
      <title>OK6818-C使用SD卡烧写LInux 不成功</title>
      <link>https://bbs.forlinx.com/thread-92979-1-1.html</link>
      <description><![CDATA[已解决，此贴终结




OK6818-C 之前不小心用OTG模式烧写错了Android镜像。换了确定好的Linux镜像，在Ubuntu 14 下制好卡，复制好文件，拨好开关，串口输出信息如下
不论SD卡烧写什么镜像，串口输出都是这样子。

 ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>ccyjiushiwo</author>
      <pubDate>Mon, 27 Dec 2021 11:16:28 +0000</pubDate>
    </item>
    <item>
      <title>AX88772B USB以太网转换器使用需要外掛EEPROM嗎?</title>
      <link>https://bbs.forlinx.com/thread-81251-1-1.html</link>
      <description><![CDATA[請問使用AX88772B需要另外配置EEPROM嗎?
Kernel有支援嗎?]]></description>
      <category>S5P4418/S5P6818</category>
      <author>stevenSU</author>
      <pubDate>Tue, 02 Nov 2021 06:26:49 +0000</pubDate>
    </item>
    <item>
      <title>咨询 FET4418-C MIPI DSI /CSI 接口视频格式确认</title>
      <link>https://bbs.forlinx.com/thread-75909-1-1.html</link>
      <description><![CDATA[您好！
我司现有一产品 开发 ，需要用FETT4418的MIPI 的DSI /CSI 接口 分别于另一安卓模块的MIPI 的CSI/DSI 接口对接，分别将本端的DSI输出经过一个桥接芯片后送给对端的CSI输入 。

请教一下芯片FETT4418 的DSI、CSI  支持的  是什么格式的， 一般 视频格式有三种：RG ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>TIANLANG</author>
      <pubDate>Mon, 09 Aug 2021 06:44:49 +0000</pubDate>
    </item>
    <item>
      <title>S5P6818的一些学习笔记</title>
      <link>https://bbs.forlinx.com/thread-75858-1-1.html</link>
      <description><![CDATA[S5P6818的一些学习笔记]]></description>
      <category>S5P4418/S5P6818</category>
      <author>FuZhenYu163</author>
      <pubDate>Wed, 28 Jul 2021 10:03:34 +0000</pubDate>
    </item>
    <item>
      <title>内核添加“802.1Q  VLAN Support”后，内核编译错误</title>
      <link>https://bbs.forlinx.com/thread-75754-1-1.html</link>
      <description><![CDATA[我买的是S5P6818-C2，因为需要用到VLAN，所以我在内核中增加了“802.1Q  VLAN Support”
但编译的时候，出现一下错误，麻烦大侠帮忙分析一下  CC      drivers/net/ethernet/nexell/nxpmac/nxpmac_main.o
drivers/net/ethernet/nexell/nxpmac/nxpmac_main.c: In functio ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>lishun800525</author>
      <pubDate>Sat, 17 Jul 2021 09:48:32 +0000</pubDate>
    </item>
    <item>
      <title>6818怎么实现不输入用户名，实现自启动</title>
      <link>https://bbs.forlinx.com/thread-75656-1-1.html</link>
      <description><![CDATA[RT，6818怎么实现不输入用户名，实现自启动，]]></description>
      <category>S5P4418/S5P6818</category>
      <author>xiaowenwen</author>
      <pubDate>Tue, 22 Jun 2021 13:12:35 +0000</pubDate>
    </item>
    <item>
      <title>6818-C1如何改主頻???</title>
      <link>https://bbs.forlinx.com/thread-75633-1-1.html</link>
      <description><![CDATA[請問CPU主頻有方法修改嗎??不是改scaling_governor的那種]]></description>
      <category>S5P4418/S5P6818</category>
      <author>stevenSU</author>
      <pubDate>Wed, 16 Jun 2021 09:57:38 +0000</pubDate>
    </item>
    <item>
      <title>网卡eth0无法启用</title>
      <link>https://bbs.forlinx.com/thread-75204-1-1.html</link>
      <description><![CDATA[首先我查看网络信息发现eth0并未启动
# ifconfig
lo        Link encapocal Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:130 errors: ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>XLTX</author>
      <pubDate>Wed, 26 May 2021 07:24:54 +0000</pubDate>
    </item>
    <item>
      <title>关于OK6818插入USB键盘无法操作问题</title>
      <link>https://bbs.forlinx.com/thread-75072-1-1.html</link>
      <description><![CDATA[官方Linux4.8.6 QT系统文件，在上电前插入USB键盘，上电后USB键盘正常，但是如果在上电后再插入USB键盘，这时键盘按键没有反应。但是鼠标随插随用。麻烦解答下？]]></description>
      <category>S5P4418/S5P6818</category>
      <author>tsl2122342</author>
      <pubDate>Sat, 10 Apr 2021 06:59:34 +0000</pubDate>
    </item>
    <item>
      <title>[OK6818-C2]编译光盘中的testapp出错</title>
      <link>https://bbs.forlinx.com/thread-74973-1-1.html</link>
      <description><![CDATA[按照贵司配置好QT Creator后，编译下载的贵司的testapp一直报错，报错信息如下：
编译的报错信息如下：
21:19:22: Running steps for project app...
21:19:22: Starting: \&quot;/usr/bin/make\&quot; clean
cd matrix-gui-browser-2.0/ &amp;&amp; ( test -e Makefile || /opt/arm-cortex_ ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>lishun800525</author>
      <pubDate>Tue, 30 Mar 2021 13:26:08 +0000</pubDate>
    </item>
    <item>
      <title>使用原廠提供ketnel內的I2C0無反應</title>
      <link>https://bbs.forlinx.com/thread-74953-1-1.html</link>
      <description><![CDATA[其他I2C1和I2C2開啟可以正常工作
已在makeconfig開啟I2C0的選項
也把GPIO腳指定至對應腳AC19 , AC20
但I2C0卻無法產生正常波型而無法工作
請問是板子還是kernel的問題??]]></description>
      <category>S5P4418/S5P6818</category>
      <author>stevenSU</author>
      <pubDate>Tue, 23 Mar 2021 02:14:50 +0000</pubDate>
    </item>
    <item>
      <title>OK6818 启动自动Rebooting in 5 seonds.....</title>
      <link>https://bbs.forlinx.com/thread-74668-1-1.html</link>
      <description><![CDATA[我购买的是OK6818-C2 1G + 8G的板子
我用源码编译后，制成img (boot.img 和 data.img)（无QT / 无console）
替换原有boot.img 和 data.img后，用SD卡烧录后。板子启动后，一直重启，如下图（log 请参看附件）：


麻烦大神帮忙分析一下是什么原因。

谢谢！
 ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>lishun800525</author>
      <pubDate>Sun, 14 Mar 2021 08:15:02 +0000</pubDate>
    </item>
    <item>
      <title>4418开发板如何实现不让屏幕休眠？</title>
      <link>https://bbs.forlinx.com/thread-73830-1-1.html</link>
      <description><![CDATA[如题，入手的OK4418开发板，用qt在linux系统下做的应用。屏幕定期关闭，想请问一下如何不让屏幕自动关闭？]]></description>
      <category>S5P4418/S5P6818</category>
      <author>cham8195</author>
      <pubDate>Tue, 26 Jan 2021 06:01:53 +0000</pubDate>
    </item>
    <item>
      <title>S5P4418如何用JTAG连接</title>
      <link>https://bbs.forlinx.com/thread-73747-1-1.html</link>
      <description><![CDATA[最近想用JTAG调试S5P4418，使用Jlink，发现无法连接，错误信息如下，不知是否有老铁知道如何解决：]]></description>
      <category>S5P4418/S5P6818</category>
      <author>菜鸡李安晏</author>
      <pubDate>Wed, 23 Dec 2020 14:19:02 +0000</pubDate>
    </item>
    <item>
      <title>4418板可以通过apk修改IP地址吗</title>
      <link>https://bbs.forlinx.com/thread-73728-1-1.html</link>
      <description><![CDATA[想做一个apk来配置网络的ip地址网关等网络相关数据，4418板子支持吗]]></description>
      <category>S5P4418/S5P6818</category>
      <author>nice_cxf</author>
      <pubDate>Fri, 18 Dec 2020 07:31:07 +0000</pubDate>
    </item>
    <item>
      <title>andriod 版本 如何获取root权限</title>
      <link>https://bbs.forlinx.com/thread-73671-1-1.html</link>
      <description><![CDATA[OK4418C开发板 andriod版本，需要获取root权限，需要如何配置？
使用adb shell 连接之后
输入su，提示命令不存在
输入busybox su，,提示  must be suid to work properly 
在网上查找资料，说要更换busybox的权限， 在串口上用root用户，执行 chmod 4755          busyb ...]]></description>
      <category>S5P4418/S5P6818</category>
      <author>nice_cxf</author>
      <pubDate>Thu, 26 Nov 2020 06:36:20 +0000</pubDate>
    </item>
    <item>
      <title>开发板自带的浏览器输入网址访问为什么没有反应呢？</title>
      <link>https://bbs.forlinx.com/thread-73662-1-1.html</link>
      <description><![CDATA[开发板自带的浏览器输入网址访问为什么没有反应呢？
网页不会跳转，工具栏的几个链接也打不开。]]></description>
      <category>S5P4418/S5P6818</category>
      <author>897545141</author>
      <pubDate>Mon, 23 Nov 2020 09:50:46 +0000</pubDate>
    </item>
  </channel>
</rss>