ok6410a核心板启动到如下位置??

ok6410a核心板启动到如下位置,不动时是哪的问题
sysIntr = 27)
[HSMMC0] Turn OFF the F/B delay control.
[HSMMC1] Initializing the HSMMC Host Controller
-OALIntrRequestSysIntr(irq = 7, sysIntr = 28)
-OALIntrRequestSysIntr(irq = 95, sysIntr = 29)
[HSMMC0] Card is Inserted!
[HSMMC1] Turn OFF the F/B delay control.
[HSMMC1] Card is Inserted!
[HSMMC0] Turn OFF the F/B delay control.
[HSMMC1] Turn OFF the F/B delay control.
[HSMMC0] CSDHCSlotBase::SDClockOn: Timeout waiting for CLOCK_STABLE
[HSMMC1] CSDHCSlotBase::SDClockOn: Timeout waiting for CLOCK_STABLE
[HSMMC0] Setting for 1 bit mode , Clock Rate = 100000 Hz
[HSMMC0] Turn OFF the F/B delay control.
[HSMMC1] Setting for 1 bit mode , Clock Rate = 100000 Hz
[HSMMC1] Turn OFF the F/B delay control.
[HSMMC0] CSDHCSlotBase::SDClockOn: Timeout waiting for CLOCK_STABLE
[HSMMC1] CSDHCSlotBase::SDClockOn: Timeout waiting for CLOCK_STABLE
<Davicom DM9000A driver for WinCE 6.0>
<DM9:++MiniportIntialize>
[dm9: Tries to map io space with 18000000]
[dm9: The mapped address is D2F60000]
[dm9: Chip signature is 0A469000]
<DM9:--MiniportIntialize>
[UFNPDD] USB Serial Function Class Enabled
[USB] dii.dwIrq = 96
-OALIntrRequestSysIntr(irq = 96, sysIntr = 30)
ERR CMD:5 : ERR CMD:5 : ERR CMD:5 : ERR CMD:5 : ERR CMD:5 :

好像是到sd的相关部分出了问题

请问楼主烧写映像的来源，以及开发板型号？

映像来源于飞凌光盘 开饭ok6410a

应该是板子硬件出了啥问题,今年买的板子如何维修

换个linux系统试试，看看这部分会不会报错。