烧写问题总结

hewei259 发表于 2012-11-14 10:55
SD卡一键烧写Linux2.6.28，烧写信息如下，但切换到nand flash启动，无法启动，超级终端只显示了个K，无其它 ...

你好，你的板子有坏块，你需要先根据手册上介绍的方法，清除下坏块，再烧写

zkbao 发表于 2012-11-6 10:16
一键烧了LINUX后，用nandflash启动后，OK6410的屏幕是黑的，启动时用串口连着超级终端，看见好多信息，不明 ...

not be correct to write filesystem (yaffs2) to board. please change filesystem name to "scramfs",write again.
Beside,If you can use Linux command on DNW when OK6410 is black creen,you need continue to attampt write Yaffs2 to your Linux system of  Board.

l7652133 发表于 2012-11-24 21:04
嗯，我是按照手册先格式化sd卡，然后将mmc.bin用燒写工具燒写进去。然后，开发板上设置sd卡启动，可是出现的 ...

click   "5" on keyboard to continue,This is the lastest Uboot Version.it add Uboot Menu list on uboot.It is easy